Dynaudio S4-LCRMT in-ceiling speaker 2-ways, Cover in white
Simple installation, simple finishing, simply brilliant
It isn’t fun cutting through studs in walls. It isn’t fun dealing with the extra bracing required. It isn’t fun cleaning up the sawdust. So don’t put yourself through it…
The Dynaudio Custom Studio series S4-LCR65 system is modular; its separate woofer and tweeter modules are designed to fit snugly in the spaces between standard American 16in on-center wall-studs. That means you can configure a full three-way LCR array with no modifications – and no more effort than it takes to spec the rest of the system.
The tweeter modules can be placed either way up to optimize the system for the listening position, while a rear switch lets you match their power setting to the number of woofer modules you’ve chosen. There’s also a passive filter bypass setting to unlock an unlimited range of fully active LCR system configurations.
Our engineers wanted to make it as easy as possible to install a larger array in one go, which is why magnetic fastenings hold everything securely together if you’re not separating the modules. The S4-LCR65 system also uses the exact same unique clamp-and-lock mechanism as the rest of the Dynaudio Custom Studio range.
Ingenious solutions to common woes
You want ease of use? You’ve got it. Dynaudio Custom Studio series rectangular in-wall speakers use some ingeniously simple technology to get you up and running with minimal fuss… and at maximum speed.
The frames are pre-installed during construction or renovation (the house can be finished around them). Then, when it’s time, your expert installer comes to mount and fine-tune the speakers – so it’s exactly right, first time. All without damaging the décor or having to pull anything apart.
Like the Studio series round in-ceiling speakers, the rectangular in-wall versions have a tweeter-level switch and include paintable magnetically attached grilles for an even more personalized set-up. And, of course, they use Dynaudio’s legendary 1in soft-dome tweeter and MSP driver technology – the same stuff you’ll find in our celebrated hi-fi, automotive and pro-studio speakers.
Specifications
Simple installation, simple finishing, simply brilliant
It isn’t fun cutting through studs in walls. It isn’t fun dealing with the extra bracing required. It isn’t fun cleaning up the sawdust. So don’t put yourself through it…
The Dynaudio Custom Studio series S4-LCR65 system is modular; its separate woofer and tweeter modules are designed to fit snugly in the spaces between standard American 16in on-center wall-studs. That means you can configure a full three-way LCR array with no modifications – and no more effort than it takes to spec the rest of the system.
The tweeter modules can be placed either way up to optimize the system for the listening position, while a rear switch lets you match their power setting to the number of woofer modules you’ve chosen. There’s also a passive filter bypass setting to unlock an unlimited range of fully active LCR system configurations.
Our engineers wanted to make it as easy as possible to install a larger array in one go, which is why magnetic fastenings hold everything securely together if you’re not separating the modules. The S4-LCR65 system also uses the exact same unique clamp-and-lock mechanism as the rest of the Dynaudio Custom Studio range.
Ingenious solutions to common woes
You want ease of use? You’ve got it. Dynaudio Custom Studio series rectangular in-wall speakers use some ingeniously simple technology to get you up and running with minimal fuss… and at maximum speed.
The frames are pre-installed during construction or renovation (the house can be finished around them). Then, when it’s time, your expert installer comes to mount and fine-tune the speakers – so it’s exactly right, first time. All without damaging the décor or having to pull anything apart.
Like the Studio series round in-ceiling speakers, the rectangular in-wall versions have a tweeter-level switch and include paintable magnetically attached grilles for an even more personalized set-up. And, of course, they use Dynaudio’s legendary 1in soft-dome tweeter and MSP driver technology – the same stuff you’ll find in our celebrated hi-fi, automotive and pro-studio speakers.
Specifications
- Type: 2-way in-wall mid/tweeter module
- Tweeter: 28mm (1in)
- Mid/bass: 100mm (4in)
- Frequency response (±3dB): 250Hz-20kHz
- Impedance (nominal/minimum): 8Ω / 5Ω
- Sensitivity: 89±3dB (250-20kHz)
- Rated power: 50W
- Long term power: 150W
- Tweeter level options: +3dB,0dB,-3dB
- Type: 2-way in-wall mid/tweeter module
- Tweeter: 28mm (1in)
- Mid/bass: 100mm (4in)
- Frequency response (±3dB): 250Hz-20kHz
- Impedance (nominal/minimum): 8Ω / 5Ω
- Sensitivity: 89±3dB (250-20kHz)
- Rated power: 50W
- Long term power: 150W
- Tweeter level options: +3dB,0dB,-3dB
PDF-Product information
You have to be logged in and must have bought this product to write a review.
- No review available for this item.
You receive a 2 year warranty from the date of purchase for all of our high quality hifi-products.
If you observe any problem while using the product, you have the possibility to contact our friendly service team.
You can also easily manage your guarantee concern – without being obliged to – under the section My Account.
Warranty extension for Dynaudio products
To extend the warranty on your Dynaudio loudspeakers to a maximum of eight years, please register your speakers
online at http://www.register.dynaudio.com or contact your dealer for assistance. Registration has to take place within the first 3 months after the purchase of the speakers.
* Please note, that the extended warranty period is limited on active speakers and subwoofers.
If you observe any problem while using the product, you have the possibility to contact our friendly service team.
You can also easily manage your guarantee concern – without being obliged to – under the section My Account.
Warranty extension for Dynaudio products
To extend the warranty on your Dynaudio loudspeakers to a maximum of eight years, please register your speakers
online at http://www.register.dynaudio.com or contact your dealer for assistance. Registration has to take place within the first 3 months after the purchase of the speakers.
* Please note, that the extended warranty period is limited on active speakers and subwoofers.
Other Products
-
-6 %
Dynaudio Esotar² 650 Bass-Midrange (Pair)
RRP720,00 €
676,80 € 1 pair | 676,80 € /pair -
-7,8 %
Dynaudio Emit 10 Shelf-Speaker
In our storeRRP729,00 €
671,77 € 2 piece | 335,89 € /piece -
-6 %
Dynaudio Esotec System 242/ 242 GT (Set)
RRP705,00 €
662,70 € 1 set | 662,70 € /set -
-13 %
Dynaudio S4-W80 In Wall Speaker 2-Way, Cover in white
RRP849,00 €
733,32 € -
-12 %
Dynaudio S4-C80 in-ceiling speakers, Cover in White
RRP749,00 €
653,88 € -
-7,8 %
Dynaudio Emit 20 Shelf-Speaker
In our storeRRP950,00 €
875,43 € 2 piece | 437,72 € /piece -
-6 %
Dynaudio Esotar² 110 Tweeter Pair
RRP1.040,00 €
977,60 € 1 pair | 977,60 € /pair -
-9,8 %
Dynaudio Esotec MW 182
RRP268,00 €
241,63 € 1 piece | 241,63 € /piece