AMC XIA 50 Signature Edition Stereo Integrated Amplifier, 2x50 W with RC and Phono MM/MC

AMC XIA 50 Signature Edition Stereo Integrated Amplifier 2x 50 Watt RMS with RC and Phono MM/MC

The XIA50se is AMC's most affordable transistor amplifier

The This applies to the technology as well as the sound and the equipment.

Because of the many positive characteristics, it is difficult to find where to start. The AMC brand has been recognizable for decades by the green “Power” button. The 43 cm grid dimension makes it possible to place amplifiers and CD players on top of each other, as was often the case in the past. 3 analog inputs, 1 high-quality phono MM/MC input (with 3 OP amps) and 1 optical digital input including 24 bit / 192 KHz HiRes converter demonstrate a wide range of connections. There is also no lack of a headphone jack. On top of that, the XIA50se has a tone control and a balance control.

The well-sized power supply with a 200 VA toroidal transformer and 20,000 microfarad filter capacity enables the power amplifier to have a continuous output of at least 2 x 50 / 65 watts at 8 / 4 ohms. It sounds and feels like much more. The HCO technology allows peak currents of up to 30 amps. Thanks to the AMC "Soft Clipping" technology, the typical AMC sound is revealed with a certain tendency towards tube sound.
 
A system remote control, including source selection switching (via motor) and 10-key keyboard for the CD player, is of course included in the scope of delivery.

Specifications

• Concept: Transistor amplifier - Class A/B technology
• Special feature: HCO technology with 30 amps peak current
• Power amplifier: 2 x 4 Sanken power transistors
• Sieve capacity: 20,000 micro-Farads
• Continuous power: 2 x 50/65 watts at 8/4 ohms
• Music power: 2 x 60/78 watts at 8/4 ohms
• Impedance: 4 - 8 ohms
• Frequency response: 10 Hz - 60 KHz, - 3 dB
• Frequency response: 20Hz - 20KHz, +/- 0.5dB
• THD at rated power: 0.05% / 20 Hz - 20 KHz
• Signal / noise ratio - Line: 88 dB
• Signal/noise ratio - Phono: 80 dB
• Crosstalk attenuation: > 65 dB
• Input sensitivity line: 23-150 mV
• Phono MM/MC input sensitivity: 0.5 - 2.7 mV / 0.05 - 0.27 mV
• Input resistance line: 20 K-Ohm
• Input resistance Phono MM / MC: 47 K-Ohm / 100 pF
• Inputs: 3 x Line, Phono MM/MC, Main In
• Digital input: 1 x Optical 24 Bit / 192 KHz HiRes
• Outputs: speakers, pre out, headphones 32 to 600 ohms
• Bass control 100 Hz: +/- 10 dB
• Treble control 10 KHz: - 8 / + 11 dB
• Negative feedback: 26 / 29 dB
• Volume control: mechanical potentiometer with motor
• Accessories: remote control and power cable
• Housing front: black aluminum
• Weight: 6.5kg
• Dimensions: w 43 x d 28.8 x h 8.2 cm